Analyzer Houses

The picture above was taken at the time of delivery to site of a panel construction type analyzer house. The materials of construction was 3CR12which was powder coated The Analyser house was fitted with four Siemens Infra-red Analysers. The sample conditioning on the side of the house was heated with steam to ensure the process sample were kept in the vapour phase. The analyzer house was installed in a Zone II area classification and supplied with a split level air-conditioning system as well as a forced ventilation system.

The picture above was taken of a Panel construction type shelter. The materials of construction was 3CR12 powder coated. The sample conditioning system inside the wire cage was for conditioning of high purity ethanol.
The analyzer shelter was fitted with a Process gas chromatograph to perform the analyses. The Analyser house was supplied and fitted with a split level air-conditioning system as well as a forced ventilation system and was suitable for use in a Zone II area classification.


The Analyser house in the picture above was taken off a Sandwich panel construction type analyzer house. The materials of construction was Zinc-Alume powder coated. A process gas chromatograph was used for the analyses. The system was supplied with a forced ventilation system and a split level air-conditioner. The Sample system was designed for a multi stream application.	The Analyser house above was a 3m (w) x 6m (l) x 3m (h) and was a Sandwich panel construction type. The materials of construction was 304 Stainless steel. The Shelter was supplied together with a HVAC system. which was fitted to the left of the door.

The picture above a 6 meter shelter of panel construction manufactured from 3CR12. The analyzer house was supplied with six Process gas chromatographs. It was furnished with a split level air-conditioner and a forced ventilation system. The area classification was Zone II.

The picture above shows a sandwich construction Analyser house manufactured from pre-painted galvanized sheeting ready to ship to the construction site.. The materials of construction for the base was 304 Stainless steel.. The sample conditioning system was designed for the measurement of volatile organics which are shown in the left and middle of the system. The sample system on the right was for a dual stream and was heated with steam. The measurement was done by a process gas chromatograph.