| The picture above shows a typical canopy which is fitted with three analysers. The orange enclosure was for the 220 VAC local distribution board. The bdistribution board was facilitated with a safe guard system and the sample system was fitted in the rear inside the cage area. The system was suitable for use in a Zone II area classification. |
This picture was taken from a Canopy system which was designed and fabricated for a Zone II area classification. The Analyser was installed inside the top enclosure. The electrical distribution board and safe guard interlock system was installed in the middle enclosure.. The pre-conditioning and sample system was installed on the side and bottom. The material of construction was 3 CR12, powder coated. |
