The picture to the right shows a typical Canopy which is fitted with three analysers. The orange enclosure was for the 220 VAC local distribution board. The distribution board was facilitated with a safe guard system and the sample system was fitted in the rear inside the cage area. The system was suitable for use in a Zone II area classification.

This picture to the left was taken from a Canopy system which was designed and fabricated for a Zone II area classification. The Analyser was installed inside the top portion of the enclosure. The electrical distribution board and safe guard interlock system was installed in the middle enclosure.. The pre-conditioning and sample system was installed on the side and bottom. The material of construction was 3 CR12, powder coated.

The application where it was installed was base metal, on an arc furnace off-take measurements.